top bar


Revision as of 01:42, 29 January 2018 by S3LSteffen (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

WSB PiezoDrive CAN adapter

Summary:Interfaces Wienecke & Sinske GmbH piezo stage controller
Author:S3L GmbH
Platforms:All Platforms (serial port)

This adapter interfaces piezo xy stages driven by Wienecke & Sinske WSB PiezoDrive CAN controller. It communicates with the controller through the serial port so that no further software is needed.
If the stage is connected via CAN to a motorized Zeiss microscope, you also may use the ZeissCAN29 motorized microscope device to control those stages.

Special properties of the XYStage:

MaxSpeedSets the maximum speed of the XY stage
AccelerationSets the acceleration of the XY stage

COM Settings:

Answer TimeoutLong enough for stage to complete moves
Baud Rate57600
Delay Between Chars Ms0
Stop Bits1

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact