top bar

Difference between revisions of "Vincent"

(Vincent shutter controller adapter)
Line 16: Line 16:
  
 
--[[User:Nico|Nico]] 09:36, 8 September 2007 (PDT)
 
--[[User:Nico|Nico]] 09:36, 8 September 2007 (PDT)
 +
 +
If using an actual serial cable, ensure that the cable is of the [http://en.wikipedia.org/wiki/Null_modem "null modem"] type.
 +
 +
--[[User:oreopoj|oreopoj]] 14:06, 8 September 2010 (EST)

Revision as of 11:13, 3 November 2010

Vincent shutter controller adapter

Summary:Interfaces to Vincent (Uniblitz) shutter controllers
Author:Nico Stuurman
License:BSD
Platforms:Windows, Mac OS X and linux (serial port)
Devices:Vincent controllers VMM-D1/T1, D122, D3/D4
Example Config File:


This adapter controls the Vincent shutter controllers D1, T1, D3 and D122 (not available anymore). Connect the controller through a serial port and configure the port as specified in the manual to your controller (the D122 uses a baudrate of 300, others are 9600, for the D122 set 'DelayBetweenCharsMs' to 50-100, for other controllers this can be 0). Multiple controllers can be daisy chained as the adapter can address these daisy-chained controllers (Property Address, use x to address all daisy-chained controllers).

The Vincent D3 controls up to 3 shutters. For each shutter, make a separate Vincent-D3 device, and set the "Channel #" pre-initialization property to the desired shutter number.

--Nico 09:36, 8 September 2007 (PDT)

If using an actual serial cable, ensure that the cable is of the "null modem" type.

--oreopoj 14:06, 8 September 2010 (EST)

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact