top bar

Difference between revisions of "OlympusIX81"

Line 30: Line 30:
 
These serial port settings require all DIP switches on the front of the "Frame Control Unit" (the box connected to the serial cable) to be in their default position: off (zero).
 
These serial port settings require all DIP switches on the front of the "Frame Control Unit" (the box connected to the serial cable) to be in their default position: off (zero).
  
BX61 specific notes: Currently only one filter wheel is supported (connected to FW1 port on the controller). If there is a need to add support for more filter-wheels please email.
+
BX61 specific notes: Currently only one filter wheel is supported (connected to FW1 port on the controller).

Revision as of 03:31, 1 September 2009

Olympus IX81/ BX61 adapter

Summary:Controls Olympus IX81/ BX61 microscope
Author:Jeff Kuhn and Arthur Edelstein, BX61 support added by Shalin Mehta
License:not Open Source
Platforms:Windows, Mac OS X (through serial port)
Available since version:1.3.22
Default serial port settings:
BaudRate 19200
DelayBetweenCharsMs 0
Handshaking Off
Parity Even
StopBits 2


These serial port settings require all DIP switches on the front of the "Frame Control Unit" (the box connected to the serial cable) to be in their default position: off (zero).

BX61 specific notes: Currently only one filter wheel is supported (connected to FW1 port on the controller).

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact