top bar

Difference between revisions of "LeicaDMR"

Line 12: Line 12:
{| cellspacing="2" border="0" cellpadding=3
{| cellspacing="2" border="0" cellpadding=3

Revision as of 09:17, 9 September 2010

Leica DMR adapter

Summary:Controls Leica DMRxx and DMIRBE microscopes
Platforms:Windows, Mac OS X and Linux (serial port)
Devices:Scope, Shutter, Halogen Lamp, Reflected light module, Objective Nosepiece, Z-drive, Aperture diaphragm, Field diaphragm
Available since version:1.3.40
Default serial port settings:
AnswerTimeoutMs 5000
BaudRate 9600
DelayBetweenCharsMs 0
Handshaking Hardware
Parity None
StopBits 1

This adapter controls Leica DMR microscopes through a direct serial interface. It was build for and tested with a DMRXA, but likely works with other DMR models (DMRXE, DMRME, DMRBE, DMRA and DMIRBE) as well. This adapter does not support DM LA, DM LFSA, DM IRE2, DM RA2, or DM RXA2.

To use this adapter, connect the microscope using a null modem DB9 serial cable to a serial port connected to your computer. In the Hardware Configuration Wizard you will need to 'Add' the LeicaDM Microscope device (and have it use the serial port you just configured).

You will need to define all hardware that is part of your microscope in the Hardware Configuration Wizard (i.e., Micro-Manager does not query the microscope itself for devices present).

© Micro-Manager : Vale Lab, UCSF 2006-2011 | All Rights Reserved | Contact